FUJIFILM Corporation (President: Kenji Sukeno) will release free firmware updates for the FUJIFILM X-Pro2 (“X-Pro2”), FUJIFILM X-T2 (“X-T2”), FUJIFILM X100F (“X100F”) and FUJIFILM X-T20 (“X-T20”) X Series mirrorless digital cameras. These updates will be released in November and December 2017 and are a result of requests for improving usability and adding new functions. Installing these firmware updates will add new support for the “FUJIFILM X RAW STUDIO” software which allows the user to connect the camera to a computer via USB cable for developing raw files in camera (X-Pro2, X-T2, X100F). The new firmware will improve third party studio flash controller usability (X-Pro2, X-T2, X100F) and will dramatically improve the AF-C tracking algorithm in zone and tracking AF mode (X-Pro2, X-T2), add 4K video support, computer tethering function (X-Pro2) and enhance the touch panel operation when using the EVF (X-T20). *Check the detail update for each camera. Firmware Version -due late November : X-T2, X-T20 Firmware Version -due late December : X-Pro2, X100F FUJIFILM X-Pro2: Ver.4.00 1.Addition of 4K video mode (excluding HDMI out) The update adds 4K video using the X Series’ famous Film Simulation modes. You can input audio from an external microphone. (Excluding HDMI output for recording) 2.Support for tether shooting via USB or Wi-Fi After connecting a camera to a computer, the compatible software (*1) will enable users to transfer images taken with the camera to the computer and save them in a specified folder, or to control the camera from the computer. 3.New AF tracking algorithm for moving subject Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware(*2). In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before. 4.Support “FUJIFILM X RAW STUDIO” Once connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X Processor Pro. The first batch processing will also be available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free. 5.Improve radio flash controller usability The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers. 6.Support for backup/restore of camera settings via FUJIFILM X Acquire Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available. *1Software listed below is required. FUJIFILM X Acquire http://fujifilm-x.com/x-stories/fujifilm-x-acquire-features-users-guide/ Tether Shooting Plug-in PRO (*Adobe® Photoshop® Lightroom® 6 or CC is required.) [Mac]https://exchange.adobe.com/addons/products/16759 [Win]https://exchange.adobe.com/addons/products/16991 Tether Shooting Plug-in (*Adobe® Photoshop® Lightroom® 6 or CC is required.) [Mac]https://exchange.adobe.com/addons/products/12041 [Win]https://exchange.adobe.com/addons/products/12039 HS-V5 http://www.fujifilm.com/news/n141120_04.html *2FUJIFILM X Series digital camera models with X-TransTM CMOS III sensor and X-Processor Pro as of September, 2017. FUJIFILM X-T2: Ver.3.00 1.New AF tracking algorithm for moving subject Thanks to the newly developed image recognition algorithm, the update enhances AF-C to track moving subjects twice as fast as previous firmware. In addition, the update also enhances tracking to be able to capture up to 50% smaller moving subjects than before. 2.Support “FUJIFILM X RAW STUDIO” Once connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X Processor Pro. The fast batch processing will also be available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free. 3.Improve radio flash controller usability The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers. 4.Support for backup/restore of camera settings via FUJIFILM X Acquire Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available. FUJIFILM X100F: Ver.2.00 1.Support for backup/restore of camera settings via FUJIFILM X Acquire Once connecting a camera to a computer via USB cable, the “FUJIFILM X Acquire” allows users to backup/restore camera settings to/from a file. Copying all camera settings from one camera to another is available. 2.Supports “FUJIFILM X RAW STUDIO” Once connecting a camera to a computer via USB cable, the “FUJIFILM X RAW STUDIO” enables users to convert RAW files with X Processor Pro. The first batch processing is also available. The “FUJIFILM X RAW STUDIO” can be downloaded from the FUJIFILM website for free. 3.Improve radio flash controller usability The upgrade allows users to shoot with compatible third party studio flash in high speed sync. or TTL mode via their radio controllers. FUJIFILM X-T20: Ver.1.10 1.Touch panel operation when using the EVF The firmware update will make it possible to use the touch panel while looking into the viewfinder. According to the operation method, it's possible to set the effective range of the touch panel to the full screen, right half, left half, or OFF.
Я конечно рад новостям, но вот не понимаю зачем копипастить да еще и англоязычную статью )) напишите по русский вкраце и ссылку на оригинал дайте ))) а то текста много еще и на не родном ))
А что там непонятно, это ж не на японском, а на английском. Новые прошивки будут в ноябре-декабре. Основные улучшения - автофокус в AF-C (зона и трекинг объектов), улучшение поддержки HSS/TTL для сторонних производителей синхронизаторов, добавление в pro2 съемки в комп и 4k видео
Ожидаемо. 20-ку всё больше отделяют от флагманов программно. А то функционал 90% от Т2, а цена в два раза ниже - непорядок.
